Members 3D print register
Listed below are details of 3D prints that various members have offered to share with other members. If you are interested in something, then contact the member to discuss the item further and arrange for the file to be sent to you. The author of the design should be able to provide all the technical detail you need to know to print the item on your 3D printer. Most members' offerings are likely to be free but authors will be have the right to charge should they so wish.Please note that in providing this information, the Association does not give any guarantee as to the quality or suitability of any of the products, and the arrangement is purely between the author and the acquiring member.
Members wishing to use this service to list items should send the details listed below to me at products@2mm.org.uk and I will arrange for the information to be listed on the Association website in the Products, small suppliers section.
| Name | Product | Email Contact | Further Details |
| Ian Morgan | LBSCR 5 plank open wagon with or without sheet lashing points | ianm42@hotmail.com | "Body model only Shapeways ready no supports skirt etc. Use 9'6""WB chassis (2-328) with shortened solebars and floor" |
| Nick Bastable | Electrified 3rd Rail Pots | nbastable@gmail.com | Designed for code 40 flatbottom rail |
| Kevin Knight | LMS Dia 1663 Van | sithlord75@bigpond.com | |
| Kevin Knight | LMS Dia 1671 7 plank open | sithlord75@bigpond.com | |
| Kevin Knight | LMS Dia 1708 40T bogie hopper for Stonebridge Power Station coal MGR | sithlord75@bigpond.com | |
| Kevin Knight | LMS Dia 1828 Ventilated Van (three different types depending on builder) | sithlord75@bigpond.com | |
| Kevin Knight | LMS Dia 1832A Ventilated Van | sithlord75@bigpond.com | |
| Kevin Knight | LNWR Dia 1 1 plank open | sithlord75@bigpond.com | |
| Kevin Knight | LNWR Dia 2 2 plank open | sithlord75@bigpond.com | |
| Kevin Knight | LNWR Dia 6 2 plank open | sithlord75@bigpond.com | Designed to fit Association etched chassis |
| Kevin Knight | LNWR Dia 15 Beer Van | sithlord75@bigpond.com | |
| Kevin Knight | LNWR Dia 21 Medium Cattle Wagon | sithlord75@bigpond.com | Designed to fit Association etched chassis |
| Kevin Knight | LNWR Dia 22 Large Cattle Wagon | sithlord75@bigpond.com | Designed to fit Association etched chassis |
| Kevin Knight | LNWR Dia 84 Open (two different types depending on detail differences) | sithlord75@bigpond.com | |
| Kevin Knight | LNWR Dia 103 One plank open | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 5 plank with end door bottom door and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 7 plank with even planks no end door but with bottom doors wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 7 plank with uneven planks end door and bottom doors T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 7 plank with uneven planks end door and bottom doors wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 7 plank with uneven planks no end door but with bottom doors T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 7 plank with uneven planks no end door but with bottom doors wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1907 8 plank with no end door bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 5 plank with no end door bottom door and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 5 plank with no end door bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 5 plank with no end door no bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 5 plank with no end door no bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with end door bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with end door bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with end door no bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with end door no bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with no end door bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with no end door bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with no end door no bottom doors and T iron supports | sithlord75@bigpond.com | |
| Kevin Knight | RCH 1923 7 plank with no end door no bottom doors and wooden supports | sithlord75@bigpond.com | |
| Kevin Knight | SR Dia 1428 12T Standard Van - Even planks (chassis change (eg unfitted) = diagram changes) | sithlord75@bigpond.com | |
| Kevin Knight | SR Dia 1452 12T Standard Van - Plywood sides (chassis change (eg unfitted) = diagram changes) | sithlord75@bigpond.com | |
| Nigel Cliffe | FineTrax B7 wing/check/closure rail filing jig. Two versions, the first for build as per instructions with two piece wing rail, second for continuous wing-rail. Author prefers two piece method. | Download Zip File | |
| Jim Watt | Chimney pots: tapered, square and round | Download Zip File |
In addition to the above, Alan Cox, the owner of "Etched Pixels"
has indicated he is winding down the business. In doing so, he has placed
a number of CAD files on GitHub, with a non-commercial use license. Please
respect Alan's license conditions if you make use of these files.
Etched
Pixels non-commercial use 3D Cad files
Jonathan Duffett has a number of components, wagons and detailing items
on his "thingiverse" page:
www.thingiverse.com/ironmink/
