Adam Bastow
contact: 2mmlandy@gmail.com

3d printed Lancashire & Yorkshire Railway wagon bodies: With more being added periodically. These will be produced mainly to order.

They are intended for use with association parts.

An Instruction Sheet has been prepared to cover these bodies.

Diagrams 1,3,4,12, intended for use with the association LNWR 9ft WB chassis, 6mm wheels, (3d printed L&Y axleboxes - if desired) and 3d printed L&Y 3 bolt buffers.

Dia.1 - single plank open	Dia.3 - covered goods
Dia.4 - high sided/coal wagon	Dia.12 - pitch wagon
Dia.15 - Fruit Wagon with falling sides (new Aug 2023)

 

Intended for use with association L&Y 10ft 6in WB chassis, etc

Dia.61 - 4 wheeled 10T brake van

Dia 81 & 83 12T Fruit Wagon with Side and End Doors (new Aug 2023)

 

 

Diagrams 62, 69, 71. Intended for use with association L&Y 12ft WB chassis, etc.

Dia. 62 - covered goods van	Dia. 69 - 20T loco coal wagon
Dia. 71 - 20T loco coal wagon	Dia 73 & 76 - 10 Ton Covered Goods (new Aug 2023)

 

An example of completed wagons using these 3d printed bodies, to Dia, 71, 3 and 62

All bodies will be supplied still attached to their 3d printed supports. Bodies and or chassis may need a bit of fettling to get them to seat properly, and I would recommend acquiring some photos of the desired wagon in question before assembly.

3d wagon body prints are £3.50 each. Post and packing will be an additional £3.00 (UK addresses), other destinations please ask. Payment to be made either via PayPal or Bank Transfer, contact by email to arrange.